V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
-
remove bolts securing viscous fan
Note: Use 2-hole nut wrench 3212 to hold.
Caution!
Left-hand thread. turn to the right to loosen.
Note: For greater clarity the viscous fan is shown with the engine removed.
-
take out viscous fan and fan shroud together by lifting upward
-
disconnect engine support at front (arrows)
-
torque: 40 Nm (30 ft lb)
Note: When re-installing engine. use shims of the same thickness to compensate engine support.
-
remove radiator hose
-
when reinstalling support, install radiator hose first
Note: Loosening/removing of vibration damper is only necessary if toothed belt is to be replaced, or if belt is removed for an engine related
repair.