V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
Wheel Bearing: Service and Repair
Rear
Rear
1. Ball joint
2. Self-locking nut - 200 Nm (148 ft lb)
always replace
3. Self-locking nut - 90 Nm (66 ft lb)
always replace
4. Bonded rubber bushing
5. Plain washer
6. Self-locking bolt - 170 Nm (125 ft lb)
always replace
clean remains of adhesive from trapezoidal arm
thread with screw-tap M 14 x 1.5
7. Collar nut - 11O Nm (81 ft lb)
always replace
8. Hexagon bolt and washer
always replace
tighten to 200 Nm (148 ft lb) and then turn additional 90° (1 4 turn)
loosen tighten only with vehicle standing on wheels
9. Self-locking bolt - 170 Nm (125 ft lb)
always replace