V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
-
Push socket in forward and rearward direction until head and socket are aligned in exact center.
-
Retighten bolts on support bracket.
Selector Linkage
-
Attach selector lever cable to ball head.
^
Socket must lock in.
-
Recall and cancel fault memory. Refer to Diagnostic Trouble Code Memory- Display/Erase.
-
Switch on ignition.
-
Press and hold brake pedal until end of check.
-
Slowly move selector lever from P via R, N, D, 3, 2 to 1. Check whether selector lever position display in dash panel insert corresponds to
selector lever position.
-
Repeat adjustment or replace multi-function switch if panel display does not correspond with selector lever position.