1 Series E81 116i (N43) 3-door
11 61 050
Removing and installing intake manifold
(N43B16)
Necessary preliminary tasks:
•
Disconnect battery negative terminal.
•
Remove suction filter housing.
•
Remove alternator.
Detach cable from bracket (2).
Unfasten plug connection (2) and disconnect.
Detach cable from bracket (3).
Unlock plug connection (4) and disconnect.
Release tank venting valve (5) from bracket.
Unlock and disconnect connection for tank venting valve (6).
Detach vent hose (1).
Release screws (2).
Tightening torque: 11 61 1AZ.
Release screws (1).
Note:
Bolts (1) must be released while installed with a universal joint
and a long extension only.
Tightening torque: 11 61 2AZ
.
RA Removing and installing intake manifold (N43B16)
BMW AG - TIS
15.01.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -