1 Series E81 116i (N43) 3-door
18 10 031
Replacing rear silencer (N43)
Special tools required:
•
00 2 210
•
31 2 220
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Support rear silencer with special tool 31 2 220 .
Note:
Removed exhaust system illustrated.
If the cutting line is not marked by a punch mark in the pipe,
determine the cutting line by means of the pipe length on the new
rear silencer (2).
Carry over cutting line to faulty rear silencer (2) and mark out.
RA Replacing rear silencer (N43)
BMW AG - TIS
15.01.2013 15:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -