1 Series E81 116i (N43) 3-door
Screw in special tool 24 2 351 until it is firmly connected with
shaft seal.
Pull out radial shaft seal by screwing in special tool 24 2 352 .
Oil sealing lip of radial seal (1). Drive in radial seal (1) with
special tool 24 2 370 as far as it will go.
RA Replacing output flange shaft seal (GA6HP19)
BMW AG - TIS
15.01.2013 15:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -