1 Series E81 116i (N43) 3-door
Press retaining strap (1) inwards and lift out (see arrow).
Remove cover (2).
Pierce cover bowl at markings (3) with a small screwdriver.
Cut through seal along line (1) in transition area between plastic
and rubber with a knife.
Insert screwdriver to a depth of max. 5 mm and unlock cover
bowl catch.
Keep cover bowl tensioned with pliers (2).
Unlock catches individually with screwdriver (1).
Unlock catches in following order:
1.
Top left
2.
Bottom left
3.
Top right
4.
Bottom right
Move screwdriver in opposite direction at both lower catches.
RA Replacing cover bowl
BMW AG - TIS
15.01.2013 19:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -