1 Series E81 116i (N43) 3-door
61 31 006
Removing and installing/replacing fixture for
steering column stalk
Warning!
Move wheels into straight-ahead position and do not alter this
position during the repair work.
With steering wheel removed, do not under any
circumstances turn/twist fixture for steering column stalk!
Necessary preliminary tasks:
•
Remove steering wheel
•
Remove top section of steering column casing.
•
Remove lower section of steering column trim
Release screws (1).
Pull back fixture for steering column switch (2) in direction of
arrow.
Disconnect plug connections behind and remove fixture for
steering column stalk (2).
Installation:
Carry out steering angle sensor adjustment.
On vehicles with active front steering, steering angle sensor
adjustment is performed by means of initial operation / adjustment
of active front steering.
RA Removing and installing/replacing fixture for steering column stalk
BMW AG - TIS
15.01.2013 21:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -