1 Series E81 116i (N43) 3-door
61 35 001
Removing and installing (replacing) trailer
module
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove right luggage compartment wheel arch trim
If necessary, remove cover for control units (1) upwards from
device carrier (2).
Installation:
Make sure cover for control units (1) is correctly seated on device
carrier (2).
Disconnect plug connection (1).
Unlock catch (2) in direction of arrow and remove trailer
module (3) upwards from device carrier (4).
RA Removing and installing (replacing) trailer module
BMW AG - TIS
15.01.2013 22:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -