1 Series E81 116i (N43) 3-door
61 67 075
Removing and installing/replacing spray
nozzles (nozzle heads) of headlight washer
system on left or right (M / aerodynamic kit)
Note:
Catch any escaping washer fluid if necessary.
Raise cover for headlight washer system (1) with nozzle
head (2) in direction of arrow.
Important!
Risk of damage!
When releasing retaining lug (3), grip housing of high-
pressure nozzle (5) and then allow to slide back slowly.
Unlock retaining lug (3) with a suitable tool.
Remove cover for headlight washer system (1) with nozzle
head (2) from high-pressure nozzle housing (5).
Release cover for headlight washer system (1) at attachment
points (6) from nozzle head (2).
Installation:
Make sure sealing ring (4) is correctly fitted on nozzle head (2).
Nozzle head (2) must engage audibly on high-pressure nozzle
housing (5).
If necessary, top up washer fluid.
RA Removing and installing/replacing spray nozzles (nozzle heads) of headlight wash
BMW AG - TIS
15.01.2013 22:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -