1 Series E81 116i (N43) 3-door
Installation:
Make sure retainer (2) is correctly seated on left footwell heating
duct (1).
Insert left footwell heating duct (1) with adapter (3) in left rear
compartment heating duct (4).
Attach left footwell heating duct (1) in area (4) to heater/air
conditioner. Make sure assembly is locked exactly at point (5).
Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach servodrive for blending flap (3) in direction of arrow from
heater/air conditioner (4).
Installation:
Place servodrive for blending flap (3) over guide pin (5).
RA Removing and installing/replacing servodrive for blending flap (left)
BMW AG - TIS
15.01.2013 22:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -