1 Series E81 116i (N43) 3-door
64 11 208
Replacing heater core
Important!
Determine manufacturer of installed heater (Denso or Behr)
before ordering spare parts!
Remove trim panel for pedal assembly.
Necessary preliminary tasks:
•
Remove heater/air conditioner
Release screws (1).
Slide rubber grommet (1) with foam seal forward slightly.
Carefully feed pipe holder (3) with pipes (4) past rubber
grommet (2).
Installation:
If necessary, replace rubber grommet (1) and/or foam seal.
Make sure rubber grommet (1) is correctly seated on pipe
holder (3).
If necessary, remove coolant hose (2).
Release screws (3) and remove cover.
Note:
Diesel version only:
Unfasten plug connection (1) and disconnect.
Withdraw electric auxiliary heater (4) in direction of arrow.
Remove heater (5) from heater/air conditioner (6).
RA Replacing heater core
BMW AG - TIS
15.01.2013 22:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -