1 Series E81 116i (N43) 3-door
-
Shift point indicator
-
Additional Check-Control messages for automatic engine start/stop system
[System overview ...]
On vehicles with multi-audio system controller (M-ASK) or Car Communication Computer (CCC):
Various displays appear in parallel on the Central Information Display (CID), e.g. information concerning CBS or
Check Control.
Brief description of components
The following components deliver signals to the instrument cluster:
-
Outside temperature sensor
The outside temperature sensor is connected to the junction box electronics (JBE).
Wires lead from the JBE to the instrument cluster.
The outside temperature is displayed on the LCD display in the instrument cluster.
When terminal 15 is OFF, the outside temperature sensor will continue to measure the temperature for a
maximum of 24 hours.
The signal from the outside temperature sensor is digitised in the instrument cluster. A computation model
compensates for the effect of the residual heat from the engine compartment on the signal.
A lower damping value is set at higher speeds or low engine temperatures. The true outside temperature can
only be reliably expected from a roadspeed of about 80 km/h.
[more ...]
-
SZL: Steering Column Switch
Two switches are located on the turn-signal/main-beam switch on the steering column switch cluster (SZL): an
axial switch and a rocker switch.
The following contents can be called up with the two switches and shown on the LCD display in the instrument
cluster:
•
On-board computer functions and Check-Control confirmation
•
Menu for the following functions (display is encoding-dependent, also in CCC or M-ASK, depending on
equipment fitted):
-
Dim instrument illumination
-
Scroll Check-Control message
-
Check engine oil level
-
Run Flat Indicator initialisation
-
Set time
-
Set date
-
CBS settings
-
Personal Profile settings
[more ...]
-
FRM: Footwell module
The footwell module (FRM) controls the interior and exterior lighting.
From the footwell module, information is sent through the K-CAN, e.g. whether or not the indicator and warning
lights stipulated by law need to be actuated.
-
JBE: Junction box electronics or junction box
SBT Instrument cluster E81, E87, E90, E91, E92, E93
BMW AG - TIS
16.01.2013 05:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -