1 Series E81 118d (N47) 3-door
11 33 062
Removing and installing/replacing all
hydraulic valve clearance compensating
elements (N47, N47S)
Special tools required:
•
11 4 480
•
11 5 320
•
11 6 480
Necessary preliminary tasks:
•
Remove cylinder head cover.
Crank engine with special tool 11 6 480 to firing TDC position of
cylinder no. 1.
Important!
Do not crank the engine back.
RA Removing and installing/replacing all hydraulic valve clearance compensating ele
BMW AG - TIS
17.01.2013 11:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -