1 Series E81 118d (N47) 3-door
13 62 535
Replacing charge-air pressure sensor (N47)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Remove acoustic cover at front
Note:
Installation location: on intake air manifold, front.
Unlock plug (1) and remove.
Release screw (2).
Remove charge-air pressure sensor (3).
Installation:
Check sealing ring (1) of charge-air pressure sensor and replace
if damaged.
Prior to installation, apply a thin coat of anti-friction agent to
sealing ring (1) of charge-air pressure sensor.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing charge-air pressure sensor (N47)
BMW AG - TIS
17.01.2013 12:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -