bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Mounting For Cup Holder At Front > < 2 RA Cementing Of Mirror Base|Page 1619
Page 1
background image

51 16 ...

Removing and installing/replacing inside
corner trim on front door

Necessary preliminary tasks:

Version with speaker:

Remove door trim panel

Push corner trim (1) slightly upward and release in inward
direction from retainers (2).

Remove corner trim (1) from seal (3) and door trim panel (4).

If necessary, disconnect plug connection and remove corner trim
(1).

Installation:

If necessary, moisten seal (3) with water in order to fit corner trim
(1).

Ensure the corner trim (1) is seated correctly on seal (3) and door
trim panel (4).

Installation:

Catches (1) and sound insulation (2) of corner trim must not be
damaged.

Replacement:

Modify speaker

RA  Removing and installing/replacing inside corner trim on front door

BMW AG - TIS

17.01.2013  15:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Mounting For Cup Holder At Front > < 2 RA Cementing Of Mirror Base|Page 1619