1 Series E81 118i (N46T) 3-door
Remove both radial shaft seals (1).
Remove crankshaft (2).
Set down crankshaft with care, risk of damage to increment
wheel.
Crankshaft identification
The three letters featured in the illustration identify the production
crankshaft and are only relevant to series production.
Crankshaft identification
The letter featured in the illustration directly before the numeric
code signifies on a production crankshaft:
S = original dimension
B = construction stage 1 (- 0.25 mm)
RA Replacing crankshaft (N46T)
BMW AG - TIS
18.01.2013 20:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
