1 Series E81 118i (N46T) 3-door
Remove flywheel again for sealing.
Drive in both nozzles (1) with special tool 11 9 360 on left and
right into crankcase.
Place injector (2) with Loctite sealing compound, manufacturer's
number 128357, on nozzle (1).
Slowly apply sealing compound with special tool 11 4 370 .
Slowly inject Loctite sealing compound (1) - manufacturer's
number 128357 - until it emerges from the grooves of front and
rear radial shaft seals.
Assemble engine.
RA Replacing all main crankshaft bearing shells (N46T)
BMW AG - TIS
18.01.2013 20:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
