1 Series E81 118i (N46T) 3-door
Install torsion spring (1).
Make sure special tool 11 9 390 is secured in retaining plate as
illustrated.
Pretension torsion spring (1) by carefully and slowly closing pliers
on special tool 11 9 390 .
Align bore (1) with special tool 11 9 390 to thread.
Insert screw (1) and tighten down.
RA Removing and installing/replacing inlet camshaft (N46T)
BMW AG - TIS
18.01.2013 20:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
