1 Series E81 118i (N46T) 3-door
Insert bearing bracket nut on exhaust side and install without play.
All bearing bridge nuts can be initially tightened from the inside
outwards to 5 Nm.
Tightening torque: 11 31 1AZ
.
Remove special tool 11 9 310 from oil line and feed out from
intermediate lever.
Relieve tension on knurled screw (2) on special tool 11 9 301 .
Release screw (1) and remove special tool 11 9 301 .
Release special tool 11 9 303 .
Remove special tool 11 9 302 from bearing bracket (1).
RA Removing and installing/replacing inlet camshaft (N46T)
BMW AG - TIS
18.01.2013 20:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -
