1 Series E81 118i (N46T) 3-door
Note:
Replace screws of inlet and exhaust adjustment unit.
Install new screws of inlet and exhaust adjustment unit and tighten
without play.
Fit special tool 11 9 350 as illustrated.
Align locating bores of sensor gears to alignment pins on special
tool 11 9 350 .
Secure sensor gears with special tool 11 9 350 .
Screw special tool 11 9 350 to cylinder head.
Slacken bolt (1) of exhaust adjustment unit by a half turn.
Slacken bolt (2) of inlet adjustment unit by a half turn.
Fit socket on screws (1 and 2) and tighten by hand without
play.
RA Adjusting camshaft timing (N46T)
BMW AG - TIS
18.01.2013 20:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
