1 Series E81 118i (N46T) 3-door
Insert nuts of bearing caps 1 and 3 and tighten without play.
Install oil line (1).
Insert nuts of bearing caps 2 and 4 and tighten without play.
Insert banjo bolt of oil line (1) and tighten down.
Note:
Grip bearing caps by hand when tightening down nuts.
Align bearing caps.
Tighten down nuts of bearing caps E1 to E4.
RA Removing and installing/replacing eccentric shaft (N46T)
BMW AG - TIS
18.01.2013 20:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
