1 Series E81 118i (N46T) 3-door
Release bolts (1-3).
Lower front axle carrier max. 10 cm; if necessary, disconnect
cooler return line/coolant pipe from front axle carrier.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Make sure screws are installed in correct positions.
•
Screw (1) M12x90
•
Screw (2) M12x145
•
Screw (3) M12x53
Tighten down first screws (1) and then screws (2, 3).
Tightening torque 31 10 1AZ
.
After installation:
•
Carry out steering angle sensor adjustment/adjustment for
active steering
RA Lowering/raising front axle carrier (special tool SWZ00-2040)
BMW AG - TIS
18.01.2013 21:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
