bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Lowering_raising Front Axle Carrier (universal Lifter)|Page 904 > < 3 RA Lowering_raising Front Axle Carrier (universal Lifter)
Page 2
background image

Version with Electric Power Steering (EPS):

Cut open cable tie (1) for connecting line on front axle carrier.

Warning!

Risk of injury!

Failure to comply with the following instructions may result in
the vehicle slipping off the lifting platform and critically injuring
other persons.

 

When supporting components, make sure that

the vehicle can no longer be raised or lowered

the vehicle does not lift off the locating plates on the
lifting platform

Engage special tool  31 5 251  with a 2nd person helping
completely on workshop jack  00 2 030 .

Insert special tools  31 5 253  in telescopic supports of a profile
rail pair.

Note:

In a profile rail pair two profile rails are connected to each by
toothing.

 

Insert special tools  31 5 256  in telescopic supports of other
profile rail pair.

Note:

The jacking points on the left side are shown.

 

Align special tools  31 5 253  and 31 5 256  to front axle
carrier.

Support front axle carrier by operating workshop jack 00 2 030 .

RA  Lowering/raising front axle carrier (universal lifter)

BMW AG - TIS

18.01.2013  21:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

3 RA Lowering_raising Front Axle Carrier (universal Lifter)|Page 904 > < 3 RA Lowering_raising Front Axle Carrier (universal Lifter)