1 Series E81 118i (N46T) 3-door
31 35 005
Removing and installing/replacing push rod
(stabilizer link) for left/right stabilizer
Note (M3 only):
Make sure stabilizer link is installed in correct position.
A) Connection, stabilizer link to spring strut
B) Connection, stabilizer link to stabilizer
Release nut (1) and remove bracket for brake hose.
Release nut (3) and remove stabilizer link (2).
Installation:
Replace self-locking nuts.
Tightening torque 31 35 2AZ
.
RA Removing and installing/replacing push rod (stabilizer link) for left/right stab
BMW AG - TIS
18.01.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -