1 Series E81 118i (N46T) 3-door
Remove fluid reservoir from bracket.
Release hose clamp (1) and detach cooler return line (2) from
fluid reservoir.
Installation:
Make sure radiator return line is laid without tension and with
sufficient spacing to adjoining components.
Tightening torque 32 41 10AZ
.
Expose cooler return line up to connection on power steering coil.
Release quick-connect coupling and seal power steering coil
connection with a suitable plug.
Installation:
Make sure radiator return line is laid without tension and with
sufficient spacing to adjoining components.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing cooler return line for power steering
BMW AG - TIS
18.01.2013 22:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
