bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1047 > < 7 RA Removing And Installing_replacing Belt Pulley On Vane Pump For Power Steering
Page 1
background image

32 41 250

Removing and installing/replacing fluid
reservoir for power steering

Special tools required:

32 1 260

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

N45, N46, M47T2:

Remove intake duct if necessary with gaiter

RA  Removing and installing/replacing fluid reservoir for power steering

BMW AG - TIS

18.01.2013  22:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1047 > < 7 RA Removing And Installing_replacing Belt Pulley On Vane Pump For Power Steering