1 Series E81 118i (N46T) 3-door
Release nut (1) and remove screw towards front.
Unclip line holder (3) for pulse generator or brake pad sensor on
control arm.
Remove control arm (2).
Installation:
Bolt head points in direction of travel.
Replace self-locking nut.
Tightening torque 33 32 5AZ
.
After installation:
•
Perform chassis alignment check
RA Replacing one upper control arm
BMW AG - TIS
18.01.2013 22:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -