1 Series E81 118i (N46T) 3-door
Press retainer (1) in balance arm (2) forward in direction of
arrow.
Detach handbrake Bowden cables (3) from balance arm (2).
Release screw (1) and remove holder (2).
Installation:
Tightening torque 34 41 2AZ
.
Release wheel stud.
Nipple (1) of Bowden cable and expander lock (2) are visible
through tapped hole.
Push in core of parking brake cable in direction of expander
lock (2) as far as it will go and grip firmly.
Press nipple (1) in direction of arrow through tapped hole with a
screwdriver.
Pull handbrake cable out of wheel carrier.
Installation:
Insert handbrake cable into brake carrier/brake guard plate.
Sleeve must be inserted up to stop.
Nipple of handbrake cable must audibly snap into place in
expander lock.
RA Removing and installing or replacing both handbrake Bowden cables
BMW AG - TIS
18.01.2013 22:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
