1 Series E81 118i (N46T) 3-door
Important!
Control unit must not come into contact with dirt or moisture.
Contacts must not be bent!
Release screws (1) and carefully remove control unit (2).
Installation:
Tightening torque 34 51 1AZ
.
Replacement:
-
Carry out programming/coding
-
Adjustment of steering angle sensor
-
Mix-up check of brake lines
RA Removing and installing/replacing DSC control unit
BMW AG - TIS
18.01.2013 22:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
