1 Series E81 118i (N46T) 3-door
Pull window cavity cover strip (1) out of door mirror (2) in
direction of arrow.
Installation:
Moisten window cavity cover strip (1) prior to fitting with
approved anti-friction agent .
E92/E93 only:
Installation:
Notch (1) on window cavity cover strip (2) must be correctly
located in guide (3) of cover strip (4).
Window cavity cover strip (2) must be flush at rear to door
edge (5).
If cover strip (4) is not correctly fitted, window cavity cover
strip (2) cannot be fitted flush with door edge (5).
If necessary, align cover strip (4).
RA Removing and installing or replacing window cavity cover strip on outside of lef
BMW AG - TIS
18.01.2013 23:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
