bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing_replacing Trim For Gearshift > < 7 RA Removing And Installing_replacing Trim Strip On Roof Frame At Left Or Right
Page 1
background image

51 13 316

Removing and installing or replacing trim
strip on roof gutter at left or right

Important!

Make sure that body is not damaged.

Open door.

Starting at front, unclip trim strip (1) in direction of arrow from
clips (2).

Installation:

To avoid leaks and noises, check all clips (2) for visible damage.

If necessary, replace faulty retainers (2).

Installation:

Make sure sealing strip (2) is correctly seated on trim strip (1).

Sealing strip (2) must not be damaged.

Important!

Carry trim strip by its middle section only (risk of damage)

Perform installation work with a second person helping

Prepositioning of trim strip

Ensure trim strip runs parallel to side frame (risk of
breakage)

RA  Removing and installing or replacing trim strip on roof gutter at left or right

BMW AG - TIS

18.01.2013  23:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Trim For Gearshift > < 7 RA Removing And Installing_replacing Trim Strip On Roof Frame At Left Or Right