bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 RA Removing And Installing_replacing Cover On Outside Handle With Lock Cylinder > < 11 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1703
Page 1
background image

51 21 180

Removing and installing/replacing cover on
outside handle

Lever out cap (1) and release screw underneath.

Installation:

If necessary, replace faulty trim (1).

Pull off cover (1) in direction of arrow with outside door
handle (2) opened slightly.

Version with light package:

Installation:

Make sure outside door handle light (1) is correctly positioned in
area (2).

Guides (3) of outside door handle light (1) must be correctly
seated in carrier for outside door handle (4).

Installation:

Guides (1) must not be damaged.

RA  Removing and installing/replacing cover on outside handle

BMW AG - TIS

19.01.2013  00:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 RA Removing And Installing_replacing Cover On Outside Handle With Lock Cylinder > < 11 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1703