1 Series E81 118i (N46T) 3-door
52 14 050
Removing and installing/replacing lumbar
cushion on front seat
Necessary preliminary tasks:
•
Remove rear panel on front seat
Detach backrest cover (1) from backrest frame.
Unlock quick connector and detach air hoses - blue (1) and
red (2) - from valve housing (3).
Note:
Connections are coded against incorrect assembly.
If necessary, remove valve housing.
Detach lumbar cushion (1) from spring wire (2).
Installation:
Attach lumbar cushion (1) to second and fourth wires from below.
Unclip air hoses (3) from holder.
RA Removing and installing/replacing lumbar cushion on front seat
BMW AG - TIS
19.01.2013 01:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
