1 Series E81 118i (N46T) 3-door
61 31 038
Removing and installing (replacing) switch for
passenger airbag deactivation
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove side cover on instrument panel
Unlock catches (1) and feed out switch for passenger airbag
deactivation (2) to front of cover.
Installation:
Make sure switch for passenger airbag deactivation (2) is correctly
seated in cover.
Replacement:
Remove lock cylinder for passenger airbag deactivation.
RA Removing and installing (replacing) switch for passenger airbag deactivation
BMW AG - TIS
19.01.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
