1 Series E81 118i (N46T) 3-door
64 11 970
Replacing fogging sensor
Special tools required:
•
00 9 317
Warning!
Make sure rooms are well ventilated when working with
adhesive remover indoors.
Important!
Do not under any circumstances use paint thinner to clean the
bonding surface.
Necessary preliminary tasks:
•
Remove two-part mirror base cover
RA Replacing fogging sensor
BMW AG - TIS
19.01.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
