1 Series E81 118i (N46T) 3-door
Note:
Bumper trim shown removed for purposes of clarity.
Unlock plug connection for spray nozzle of headlight washer
system and detach high-pressure line from spray nozzle of
headlight washer system.
Press retaining lug (1) in direction of arrow and feed spray nozzle
of headlight washer system outwards out of bumper trim (2).
Installation:
Keep plug connection for spray nozzle and high-pressure line
clean and free from grease.
Make sure high-pressure line is correctly seated on spray nozzle
and spray nozzle is correctly engaged on bumper trim.
If necessary, top up washer fluid.
Replacement:
Remove base (4) from spray nozzle (5).
Unclip trim (1) from spray nozzle (5).
Installation:
Catches (2) on trim (1) and catches (3) on spray nozzle (5)
must not be damaged or missing.
Make sure liner (4) is correctly seated on spray nozzle (5).
RA Removing and installing/replacing spray nozzles for left or right headlight clea
BMW AG - TIS
19.01.2013 02:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
