1 Series E81 118i (N46T) 3-door
Necessary preliminary tasks:
•
Remove clip-mounted trim
Note:
The control panel (2) is unclipped by simultaneously
•
levering out using special tool 00 9 340
•
pulling on the relevant control button (3).
Fit special tool 00 9 340 on either side as illustrated.
Unclip control panel (2) with trim (1) at fastening points (4) and
pull back.
Release corresponding plug connections and detach control panel
(2).
Replacement:
Important!
Risk of damage to operator unit!
Carefully unclip operator unit trim (1) at inner retaining points (2)
only.
Important!
Risk of damage to operator unit (3)!
Carefully unclip operator unit trim (1) at outer retaining
points (2) only.
Remove trim (1) from operator unit (3).
RA Removing and installing or replacing heater/air conditioner operator unit (versi
BMW AG - TIS
19.01.2013 02:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -