1 Series E81 120i (N46T) 3-door
11 36 046
Removing and installing/replacing inlet and
exhaust camshaft adjustment units (N46T)
Special tools required:
•
00 9 120
•
00 9 250
•
11 5 120
•
11 9 270
•
11 9 291
•
11 9 292
•
11 9 293
•
11 9 340
•
11 9 350
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove all spark plugs.
•
Remove positioning motor for eccentric shaft.
Removal:
Crank engine at central bolt in direction of rotation to firing TDC
position of cylinder no. 1.
Inlet camshaft:
Note:
The twin surface for locating the camshaft has a curvature on its
upper side and a straight edge on its lower side.
In the firing TDC position of the 1st cylinder, the curvature on the
twin surface points upwards in the cylinder-bore axis.
RA Removing and installing/replacing inlet and exhaust camshaft adjustment units (N
BMW AG - TIS
20.01.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -