1 Series E81 120i (N46T) 3-door
Turn back special tool 11 9 293 .
Fit special tool 11 9 291 on exhaust camshaft and check timing
adjustment.
Note:
The timing is correctly adjusted when the special tool 11 9 291
rests without any gap on the cylinder head or is raised up to
1.0 mm to inlet side.
Remove all special tools.
Assemble engine.
RA Removing and installing/replacing inlet and exhaust camshaft adjustment units (N
BMW AG - TIS
20.01.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
