1 Series E81 120i (N46T) 3-door
Attach sprocket wheel (5) to oil pump shaft until it is secured in
toothing. Remove special tool 11 3 340 .
Check alignment of balancing shafts to each other.
Install and tighten down screws (3).
Important!
Left-hand threads.
Fit nut (1) and tighten down.
Tightening torque 11 41 3AZ
RA Removing and installing/replacing oil pump (N46T)
BMW AG - TIS
20.01.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
