1 Series E81 120i (N46T) 3-door
13 62 560
Removing and installing/replacing air-mass
flow sensor
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove air filter element
Release screw.
Remove air-mass sensor (1) in direction of arrow.
Note:
Add final details to vehicle.
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing air-mass flow sensor
BMW AG - TIS
20.01.2013 19:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
