1 Series E81 120i (N46T) 3-door
Screw in spindle (1) until diaphragm spring (2) is tensioned up to
stop.
Important!
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Install clutch plate in correct position.
Pay attention to text "engine end" / "transmission side".
Centre clutch plate (1) with special tool 21 2 250 .
Fit SAC clutch (1) on flywheel.
Pay attention to dowel pins (2).
SAC clutch (1) must be secured by way of dowel pins (2).
Install and tighten down screws.
Tightening torque: 21 21 1AZ
.
RA Removing and installing/replacing clutch (SAC 228 N45/N46/N45T/N43/N46T)
BMW AG - TIS
20.01.2013 20:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -