1 Series E81 120i (N46T) 3-door
Remove holder (1).
Disconnect connector (1).
Release cable from holder.
Release screws (2).
Remove bracket (3).
Tightening torque 23 00 1AZ
.
Note:
Illustration similar
Note:
120i and 320i only
Pull plug (1) out of holder and disconnect.
Cut through cable ties (1). (120i and 320i only)
Remove cover plate (2).
RA Removing and installing transmission (GS6-17BG)
BMW AG - TIS
20.01.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -