1 Series E81 120i (N46T) 3-door
Important!
Cut outer metal sheet only.
Measurement a = approx. 220 mm from roof edge.
Measurement b = approx. 120 mm from centrepoint of hole dia. 20 mm
Measurement c = approx. 180 mm from edge of roof frame
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2).
-
Weld in reinforcing panels at all severance cuts.
Open weld joints in areas (1).
Open weld joints in areas (1).
Open brazed joint in area (2).
Take off side panel.
RA Replacing rear left side panel
BMW AG - TIS
20.01.2013 22:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
