1 Series E81 120i (N46T) 3-door
Preparation of new part:
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (2).
Installation:
The parts separated by cutting are still needed.
Preparation of new part:
Open weld joints in areas (1).
Mark severance cut (2) in accordance with vehicle and cut.
Preparation of new part:
Open weld joints in areas (1).
Installation:
The parts (2) separated by cutting are still needed.
Preparation of new part:
Open weld joints in area (1).
Mark severance cut (2) in accordance with vehicle and cut.
RA Replacing luggage compartment floor (complete with both inner wheel arch section
BMW AG - TIS
20.01.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -