1 Series E81 130i (N52K) 3-door
You will find appropriate examples in the repair instructions for
the majority of lifting platforms present in BMW workshops.
For lifting platforms that are not named, the relevant
manufacturers will offer you appropriate additional supports.
Please contact directly the manufacturer of the lifting platform
used in your dealership.
Caution!
The BMW multi-trailer may only be raised by its longitudinal
members. Do not under any circumstances raise the BMW
multi-trailer by the GFK aprons. Make sure the additional
supports bear the longitudinal members over their entire width
and no attachments or wiring harnesses are touched or
jammed. Check the securing equipment of the additional
supports for correct seating. Under no circumstances should
any work be carried out underneath the BMW multi-trailer if it
is not adequately secured against slipping off the lifting
platform.
The areas (2) on the longitudinal members (1) marked in the
adjacent diagram are the best areas for attaching the additional
supports.
General notes on using twin-pillar lifting platforms
For the twin-pillar lifting platforms described, the BMW multi-trailer
is positioned in the direction of travel on the platform. For lifting
platforms which do not create sufficient clearance between disk
wheel and carrier arms, move the BMW multi-trailer against the
direction of travel onto the platform.
Becker & Söhne twin-strut underfloor platform
The BMW multi-trailer can only be raised if it is supported at right
angles to the direction of travel. For raising, use the high
additional supports (1) of Becker & Söhne.
RA Raising BMW multi-trailer
BMW AG - TIS
22.01.2013 03:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
