1 Series E81 130i (N52K) 3-door
00 00 ...
Seat belts: checking condition of belt strap, function of inertia reel mechanism, locking reel, belt
buckle
Belt strap, retractor mechanism, belt interlock
Pull out strap and make sure it emerges without jerking.
Check belt strap for
-
folding
-
unravelling
-
pinches
-
cracks and tears
-
traces of melting
-
clip as retractor lock
Retract belt strap; here the inertia reel mechanism must retract the strap automatically and without squeaking noises,
the last section of the strap may have to be fed in.
Pull out belt strap in short tugs - locking reel must lock.
Belt buckle
The tongue on the belt strap must easily snap into place with an audible click.
When the "Press" button is pressed, the tongue must be ejected from the buckle under spring pressure.
Note:
If the seat belt is damaged, you must replace the seat belt completely after consulting the customer; issue a
separate invoice for this work.
Instructions on how to proceed, refer to Checking automatic seat belt.
RA Seat belts: checking condition of belt strap, function of inertia reel mechanism
BMW AG - TIS
22.01.2013 03:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
