bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

26 RA Steering Fluid Reservoir_ Check Oil Level|Page 200 > < 25 RA Steering Components_ Checking For Zero Clearance, Leaks, Damage And Wear|Page 198
Page 1
background image

00 00 ...

Steering fluid reservoir: Check oil level.

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Using contaminated equipment to add fluid may introduce dirt
particles into the fluid reservoir and significantly reduce the
service life of the power steering system. Do not use any filler
funnels or similar!

Visual inspection and leak test

Check connections, hoses and steering gear for traces of fluid.

Checking fluid level

Check fluid level with engine switched off at expansion tank of
power steering/ride-height control system. The fluid temperature
should be approx. 20 

°

C here.

Ensure that the cap is fully screwed in prior to the fill level check.

If necessary, add hydraulic fluid (refer to Service Information
Operating Fluids) up to Max. marking (1).

Important!

If the fluid level has dropped to the Min. marking (2), you
must check the power steering and ride-height control for
leaks and issue a separate invoice for this work.

It is not enough merely to top up the fluid.

RA  Steering fluid reservoir: Check oil level.

BMW AG - TIS

22.01.2013  03:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

26 RA Steering Fluid Reservoir_ Check Oil Level|Page 200 > < 25 RA Steering Components_ Checking For Zero Clearance, Leaks, Damage And Wear|Page 198