1 Series E81 130i (N52K) 3-door
Note:
Adhere to the following work steps in sequence:
1. Open oil filter cap.
2. Release screw plug in oil sump.
Release oil filter cap with special tool 11 9 240 .
Engine oil flows out of the oil filter housing and back into the oil
sump.
Remove and insert oil filter element (1) in direction of arrow.
Installation:
Replace oil filter element (1) and sealing rings (2).
Installation:
Moisten sealing rings (2) with engine oil.
Tightening torque 11 42 1AZ
.
Open screw plug (1) in oil sump.
Drain engine oil.
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ
.
Pour in engine oil.
Note:
Start engine and run at idle until oil pressure warning lamp goes
out.
Turn off engine.
Check oil filter cap and screw plug (1) on oil sump for leaks.
RA Engine oil service (N52K)
BMW AG - TIS
22.01.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
